Home

Members

Research

Publications

Citations

Models

Animations

Collaborations

Courses

Contact

logonew

Theses

Ph.D. Theses

1. T. Mukherjee, Transport Phenomena Based Modeling of Common Defect Formation in Metal Printing, Ph.D., December 2019. (pdf)

2. J. S. Zuback, Additive Manufacturing of Functionally Graded Materials Between Ferritic and Austenitic Alloys, Ph.D., December 2019. (pdf)

3. J. J. Blecher, Hybrid Laser-Arc Welding of Ni-Base Alloy 690, Ph.D., May 2019. (pdf)

4. A. Raghavan, Laser Fired Contact Formation on Metallized and Passivated Silicon Wafers Under Short Pulse Durations, Ph.D., August 2014. (pdf)

5. B. Ribic, Modeling of Plasma and Thermo-Fluid Transport in Arc Hybrid Welding, Ph.D., December 2011. (pdf)

6. A. Arora, Thermomechanical Conditions and Stresses on the Friction Stir Welding Tool, Ph.D., December 2011. (pdf)  

7. R. Nandan, Computational Modeling of Heat Transfer and Visco-Plastic Flow in Friction Stir Welding, Ph. D., December 2008. (pdf)

8. R. Rai, Modeling Heat Transfer and Fluid Flow in Keyhole Mode Laser Welding, Ph.D. in December 2008. (pdf)

9. S. Mishra, Improving Reliability of Convective Mass Transfer Calculations in the Arc Welding of Steels using a Genetic Algorithm and a Neural Network, Ph. D., June 2006. (pdf)

10. A. Kumar, Tailoring Weld Attributes using a Genetic Algorithm and a Neural Network Trained with Convective Heat Transfer Calculations, Ph. D., June 2006. (pdf)

11. X. He, Momentum, Heat Transfer and Fluid Flow and Mass Transfer in Laser Welding of Stainless Steel with Small Scale, Ph.D., December 2005. (pdf)

12. W. Zhang, Probing Heat Transfer, Fluid Flow and Microstructure Evolution During Fusion Welding of Alloys, Ph.D., August 2004. (pdf)

13. T. Hong, Modeling Growth and Dissolution of Inclusions During Fusion Welding of Steels, Ph.D., May 2003. (pdf)

14. H. Zhao, Quality Issues in Laser Welding of Automotive Aluminum and Magnesium Alloys, Ph. D.  Thesis, December 2001. (pdf)

15. Z. Yang, Modeling Weldment Macro and Microstructure from Fundamentals of Transport Phenomena and Phase Transformation Theory, Ph.D., May 2000. (pdf)

16. T. A. Palmer, Nitrogen Plasmas and Steel Weld Metal, Ph.D., August 1999. (pdf)

17. H. Venugopalan, Fundamentals of the Directed Oxidation Process for Synthesis of Alumina/aluminum Composites, Ph.D., August 1996. (pdf)

18. K. Mundra, Interfacial Phenomena in Welding: Vaporization and Gas Dissolution, Ph.D., May 1994. (pdf)

19. K. Tankala, Role of Atomic Hydrogen during Hot Filament Assisted Chemical Vapor Deposition of Diamond, Ph.D., May 1994. (pdf)

20. M. M. Collur, Alloying Element Vaporization and Emission Spectroscopy of Plasma During Laser Welding of Stainless Steels, Ph.D., December 1988. (pdf)

21. P. Sahoo, Interfacial Phenomena in Welding, Ph.D., August 1988. (pdf)

22. S. A. Abdulgadar, Laser Welding of 200-Series Stainless Steels Solidification Behavior and Microstructural Characteristics, Ph.D., August 1988. (pdf)

23. A. J. Paul, Fluid Flow and Heat Transfer in Laser Melted Pools, Ph.D., August 1987. (Hardcopy available, please contact PSU library)

24. P. A. A. Khan, Mass Transfer During Laser Welding of High Manganese Stainless Steels, Ph.D., August, 1987. (Hardcopy available, please contact PSU library)

25. M. Alam, Behavior of Alkali Metal Cyanides in the Blast Furnace, Ph.D., May 1986. (Hardcopy available, please contact PSU library)

26. U. Pal, Reaction of PbO-SiO2 Melts with Gases, Ph. D., May 1984. (Hardcopy available, please contact PSU library)

 

M.S. Theses

1. S. Mishra, Grain Growth in the Heat Affected Zone of Ti-6Al-4V Alloy Welds Measurements and Monte Carlo Simulations, M.S. Thesis, May 2003. (Hardcopy available, please contact PSU library)

2. Y. Fan, The Effect of Torch Angle on Fluid Flow and Heat Transfer during GTA Welding, M.S. Thesis, Spring 2003. (Hardcopy available, please contact PSU library)

3. S. Sista, Computer Simulation of Grain Growth in Three Dimensions by Monte Carlo Technique, M.S., December 2000. (Hardcopy available, please contact PSU library)

4. H. Guo, Laser Assisted Cleaning of Oxide Films on 409 Stainless Steel, M.S., May 1999. (Hardcopy available, please contact PSU library)

5. M. Pastor, Pore Formation and Determination of Parameters for Laser Welding of Aluminum Alloys 5182 and 5754, M.S., August 1998. (Hardcopy available, please contact PSU library)

6. T. A. Palmer, Physical Modeling of Nitrogen Partition between the Weld Metal and its Plasma Environment, M.S., May 1996. (Hardcopy available, please contact PSU library)

7. D. Madey, Interactions between Silver and Microwave Induced Oxygen Plasma, M.S., May 1995. (Hardcopy available, please contact PSU library)

8. S. Basu, Rapid Vaporization during Pulsed Carbon Dioxide Laser Welding, M.S., August 1992. (Hardcopy available, please contact PSU library)

9. A. Banerjee, Rate Phenomena in the Plasma Assisted Chemical Vapor Deposition of Silicon Oxide Films, M.S., May 1992. (Hardcopy available, please contact PSU library)

10. K. Tankala, Rate Phenomena in the Growth and Etching of Diamond Films, M.S., May 1991. (Hardcopy available, please contact PSU library)

11. R. Miller, Plasma Temperature, Electron Density, and Laser Beam Transmission during Laser Welding of Stainless Steels, M.S., May 1989. (Hardcopy available, please contact PSU library)

12. T. Marsico, Mass Transfer Studies of Laser Welded Aluminum Alloys 5083 and 7039, M.S., May 1988. (Hardcopy available, please contact PSU library)

13. A. Patankar, Recovery of Tin from Slags, M.S., May 1988. (Hardcopy available, please contact PSU library)

14. J. Sychterz, Fluid Flow and Inclusion Removal in a Continuous Casting Tundish, M.S., May 1984. (Hardcopy available, please contact PSU library)

15. M. Alam, Coke Reactivity - Analysis of Cupola Results and Single Particle Experimental Data, M.S., December 1983. (Hardcopy available, please contact PSU library)

16. P. A. A. Khan, Thesis topic: Laser Welding of Steels Containing Nickel, Chromium and Molybdenum, M.S., May 1983. (Hardcopy available, please contact PSU library)